|
#882 - Kingwin Mach 1 800W Modular PSU |
|
|
|
Written by Zach Jeffers
|
|
Saturday, 13 October 2007 |
|
Page 2 of 5
Features:
- Special cable management system.
- Comply with Intel ATX/BTX standard.
- Four PCI express connectors.
- Six SATA connectors.
- One bottom blue led fan (140 x 140 mm).
- Support EPS & Intel 945/955/975x chipset.
- ATX 12V Ver.2.91
- AC Input 115 & 230V.
- Output gold-coated connector
- Output over / under voltage protection.
- Output short protection.
- Over load protection.
- Nickel-Plated.
- Quad 12V rails.
- Nvidia SLI certified.
- Aircraft style modular connectors.
- Built in auto fan-speed sensor.
Specifications:
|
DC OUTPUT |
| Output Voltage |
+3.3V |
+5V |
+12V1 |
+12V2 |
+12V3 |
+12V4 |
-12V |
+5VSB |
| Max. Load |
24A |
32A |
18A |
18A |
20A |
22A |
0.5A |
2.2A |
| Min. Load |
1.0A |
1.0A |
0.8A |
0.8A |
0.5A |
1.0A |
0A |
0.1A |
| Regulation |
±5% |
±5% |
-5% / +7% |
-5% / +7% |
-5% / +7% |
-5% / +7% |
±10% |
±5% |
| Ripple & Noise(mV) |
50 |
50 |
120 |
120 |
120 |
120 |
120 |
50 |
| Total Power |
800W continuous output @ 50C ambient temperature |
Maximum power: 800 Watts.
Frequency range: 47 ~ 63Hz.
Input waveform: Sine wave, modified sine wave or square wave.
Input maximum current: 10.7A@115V, 6.2A@230V.
Withstand voltage:
-
Input to output 1800Vac 3 sec.
-
Input to ground 1800Vac 3 sec.
Efficiency: 70% minimum at full-load.
Overpower protection: 105%~150%
Over voltage protection:
-
+5V output is between 5.7V to 6.5V.
-
+12V output is between 13.2V to 14.4V.
-
+3.3V output is between 3.7V to 4.1V.
Under voltage protection:
-
+5V output is between 3.3V to 3.7V.
-
+12V output is between 8.5V to 9.5V.
-
+3.3V output is between 2.0V to 2.4V.
Unit dimension: 6 3/8"(161 mm) L x 5 7/8"(150 mm) W x 3 3/8"(85 mm) H
Unit weight: 6 lbs.
MTBF: 100,000 hours under the following conditions full-rated load, 120Vac input, and 25C ambient.
Switches: ATX Logic power rocker switch.
Fan size: 1 - 140 mm x 140 mm x 25 mm bottom fan.
Packaging:
The Kingwin Mach 1 800w modular power supply came to us in the Kingwin retail packaging. This box is very well made and sturdy protecting the contents within. A nice plastic hand accompanies the exterior to provide easy transport from between the floor and your desktop…
 
While opening be careful to recognize that the top of the packaging is the back rather than the handled side. We almost lost all the contents during unpacking! Since this is a modular power supply, the modular cables are packaged disconnected from the PSU and in this case, in their own pockets within plastic case. The power supply is simply protected by bubble wrap.
  
Included with the ABT-800MA1S are two 6+2 GPU power leads (two 6-pin and two 6+2-pin connections total), two 4-pin Molex power lead sets (8 total connections + 4-pin floppy), two SATA power leads (6 total connections), a standard power cable, four mounting screws, User’s Manual and the 800 watt power supply.
|
