|
|
|
#907 - Danger Den Water Box Plus and Kit |
|
|
|
Written by Zach Jeffers
|
|
Monday, 07 January 2008 |
|
Page 1 of 8
USER LICENSE AGREEMENT FOR GODEM ONLINE INC. (3dGameMan.com):
click here
Introduction:
Danger Den is known to be a top competitor in high quality water cooling parts and accessories. This last year, they have released a number of great new products like the recently reviewed Danger Den DD-29XT VGA water block. That cooler alone dropped the max load temperatures a huge 49% over the stock cooling solution. That is impressive and exactly what you should look for in a good water cooling solution.
Today, Danger Den has supplied us with more than just a water block for review. The Danger Den Water Box Plus acrylic enclosure and Water Box Plus water cooling kit are two separately available products but are designed to be 100% compatible with each other.
Water Box Plus Case Specifications:
Dimensions: 360mm (W) x 298mm (D) x 359mm (H)
Form Factor: ATX and Micro ATX
PSU Form Factor: Standard ATX
Drive Bays: 4 x 3.5” Internal, 2 x 5.25” External
Case Fans: 3 x 120mm (not included)
Water Box Plus Case Features:
- Strong and durable 3/8” acrylic construction
- Compatible with aftermarket air coolers
- Compatible with 2 x 120mm radiators
- Custom laser etching available
- Variety of panel colors available
Water Box Plus Water Cooling Kit Specifications
TDX AM2 Block Features:
- Complete Block Assembled with Top and O-ring
- 100% Copper 110!
- #1 Accelerator Plate
- High Flow 1/2" or 3/8" OD Fittings
- Stainless Steel Hold Down
- Machined Lapped and polished beyond 1200 grit
- Pressure tested before shipment to 85psi
DD12V-D5 Fixed Speed Pump Specifications:
Motor design: Electronically commutated spherical motor with permanent magnet rotor/impeller
Voltage: 8 - 25 Volt
Current draw: 0.13 - 2.1 A
Acceptable Media: Domestic hot water, water/glycol mixtures, other non-corrosive media
Insulation Class: IP 42 / Class F
Max. System Pressure: 50 PSI
Max. System Temp: +32° F to +140°f (+/- 0 to + 60°C)
Weight: .77 LBS. (0.35 kg)
DD12V-D5 Fixed Speed Pump Features:
- Speed can still be changed by different voltages (like a fan controller that can handle 24W on a channel)
- Designed with a 50,000 hour MTBF
- Uses a 4 pin standard computer Molex connector
- Use with 1/2" ID Tubing
- Compact size allows installation almost anywhere in the case
- Powerful enough to supply multiple cooling block solutions (CPU/GPU/Chipsets)
Black Ice XtremeII Radiator Specifications:
Dimensions: 273.4mm x 133mm x 40mm
Cooling Rating: 1580 Kcal/hr (6270 BTU/hr)
Material: Copper Core and Fins, Steel Housing
Threadings: G 1/4" female
Black Ice XtremeII Radiator Features:
- 2-pass, double-row, low pressure drop radiator
- Flat tubes for maximum heat conductivity
- High-density louvered fins
- Plenum chamber for increased performance and noise reduction
- Self-tapping case mounting holes for easy installation of 120mm fans
- Fits most mid-tower cases
- Designed to meet hardcore cooling needs
Yate Loon Medium Speed Fan (D12SM-12) Specifications:
Operating Temp: -10 - 65°C
Model: D12SM-12
Rated Voltage: 12V
Operating Voltage Range: 6.5 ~ 13.8V
Rated Current: 0.30A
Thickness: 25mm
Rated Speed: 1650 RPM ± 10%
Max Air Flow: 70.5 CFM
Sound Level: 33 dB
MCT-5 Non-Conductive Solution Features:
- 32 Ounces of *Non-Conductive Fluid - Conductivity tested at 4e10 Ohms/meter
- Freezing point is -5 Degrees Fahrenheit (-20 Degrees Celsius)
- Prevents algae growth
- Pre-mixed and ready to use
- Contains lubricating properties helping pump life
- Prevents galvanic corrosion
- Safe on plastic, rubber, seals copper, brass, aluminum, steel, and gaskets
- Contains enhanced visual Tanzanite properties with background lighting
- Incorporates anti-foaming properties
- Will not separate due to mechanic shearing
Other Included Items:
- 7’ of Tygon 3603 Tubing 1/2" (Inside Diameter), 3/4" (Outside Diameter)
- 12 x Plastic Snap Tubing Clamps
- 1 x Brass Tubing Plug
- 1 x Polypropylene "T"
- 1 x 2.5g Arctic Silver Ceramique
|
|
