|
|
|
#805 - Tyan K8SE Motherboard |
|
|
|
Written by Zach Jeffers
|
|
Monday, 16 April 2007 |
|
Page 2 of 7
Specifications:
“Server performance and 64-bit power come together in the form of Tyan's Thunder K8SE (S2892), a dual AMD Opteron™ processor motherboard for intensive computing applications. Using the capabilities of the highly-scalable AMD64 processor design coupled with NVIDIA's nForce Pro core-logic, and an industry-leading Direct Connect Architecture, the Thunder K8SE delivers features such as dual Gigabit Ethernet and single 10/100 LAN ports, dual PCI Express x16 (one x16 and one x4 signal), and three PCI-X slots, support for up to eight (8) Registered DDR400/333 memory modules, integrated server video, built-in Serial ATA-II NVIDIA RAID, TARO™ storage add-on card support, and remote management option all provide customers with the ability to do more and reach higher potentials in their server applications.” ~Tyan.com
Specifications:
Processors:
- 2 x AMD Socket 940
- Single or Dual Core Processors
Chipset:
- AMD-8131 PCI-X Tunnel
- Nvidia nForce Professional 2200
- Winbond W83627HF Super I/O
- Analog Devices ADT7463 Hardware Monitoring IC
Memory:
- 128-bit Dual Channel Memory Bus
- Eight Total 184-Pin 2.5-Volt DDR DIMM Sockets (four per CPU)
- Supports up to 16GB Registered DDR
- Supports DDR400, DDR333, DDR266, DDR200
Expansion Slots:
- One x16 PCI Express slot
- One x16 PCI Express slot with x4 signal
- One PCI2.3 Compliant 5V Tolerant 32bit/33MHz Slot
- Two Independent 64-bit PCI-X buses
- Two 133/100 MHz PCI-X Slots from Bridge A
- One 100/66 MHz PCI-X Slot from Bridge B
- One 100/66 MHz max Tyan TARO SODIMM from Bridge B
Integrated I/O:
- One Floppy header for up to two drives
- One parallel header and two serial (one connector, one header)
- Four USB 2.0 ports (two rear connector and two front panel headers)
- One 15-pin VGA connector
- PS/2 mouse and keyboard connectors
System Management:
- 4 x 3-pin fan headers
- 3 x 4-pin fan headers
- One 2-pin Chassis Intrusion header
- Temperature, voltage and fan monitoring
Integrated Enhanced IDE Controller:
- Two IDE dual-drive ports for up to four EIDE devices
- Supports for UDMA 133/100/66/33 IDE drives and ATAPI devices
Integrated Video Controller:
- ATI Rage XL PCI Controller with 8mb memory
Integrated SATA2 Controllers (from nForce Professional 2200):
- 2 x Integrated dual port SATA2 Controllers
- 4 x SATA connectors support up to four drives
- 3Bb/s per direction per channel
- NvRAID v2.0 Support
- RAID 0, 1, 0+1 support
Integrated LAN Controller:
- 1 x Broadcom BCM5704C Dual Channel Gigabit Ethernet
- 2 x RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge B
- 2 x front panel LED headers
- 1 x Intel 82551QM 10/100 Mbps Ethernet controller
- 1 x RJ-45 Lan connectors with LEDs stacked on two rear USB2.0 ports
- Connected to 32bit/33MHz PCI2.3 bus
- 1 x front panel LED header
Bios:
- Phoenix BIOS on 8Mbit LPC Flash ROM
- ACPI 2.0 and SRAT support
- PXE via Ethernet, USB device boot
- SMBIOS 2.3.1, BBS 1.1 compliant
- Headless operation via serial console redirect
- 48-bit LBA Support
Intelligent Platform Management Interface Header:
- Tyan Server Management Daughter card (optional) supports features listed below via IPMI header
- QLogic Zircon Baseboard Management Controller(BMC) based on powerful ARM7 technology
- Tailored for IPMI highest 1.5 Spec.
- Supports KCS and BT styles
- Flexible Windows or Linux Management Solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I2C serial multi-master controllers and UARTs
- Built-in IPMB connector
- Remote power on/off and reset support (IPMI-over-LAN)
Form Factor:
- SSI EEB v3.0 Footprint
- 12” x 13” fits most Rackmount E-ATX Chassis
- EPS12v/SSI (24 +8pin) power connectors
- Serial (one) and VGA (one) connectors
- Stacked USB2.0 (two) connectors
- Stacked PS/2 keyboard and mouse connectors
- 3 x RJ-45 LAN connectors with LEDs
Regulatory:
- FCC Class B (DoC)
- European Community CE (DoC)
|
|
Motherboards 
