|
#820 - Mushkin PC2-6400 4GB Memory |
|
|
|
Written by Rodney Reynolds
|
|
Thursday, 03 May 2007 |
|
Page 5 of 6
Results:
For testing this product, I
used the following test setup:
Motherboard: ASUS M2N32-SLI Deluxe
CPU: AMD 64 X2 3800+
PSU:
PC Power &
Cooling Silencer 750W
Video Card: HIS
1900XTX
Hard Drives: Seagate 7200.10 320GB in RAID 0
Memory:
Mushkin PC2-6400 4GB
Memory
Overclocking:
Please note that in order to find the maximum stable
overclock, I increased the memory voltage to 2.2 using a
fairly tight timing of 5-4-4-12
T2.
I started at the default speed of 800MHz DDR2 and slowly
increased until I hit 1068MHz. I found 1068MHz DDR2 to be
stable when both running Prime95 and games. Remember, the
lower the memory timing the better. Sometimes a lower memory
timing at a lower speed will be on par with memory at a
higher speed using higher memory timings, so keep that in
mind when overclocking memory.
Please keep in mind that these overclocking results will
vary from module to module and system to system.
Also note that like most other memory, this product comes
with a limited lifetime warranty policy. To find out more
information on Mushkin's
warranty policies, please
click here.
|
