|
|
|
#826 - Sigma Atlantis Case |
|
|
|
Written by Zach Jeffers
|
|
Saturday, 26 May 2007 |
|
Page 3 of 6
Exterior:
Right out of the box the Sigma Atlantis makes bold impressions as durable. From thick vertical fins at the front, to structural impressions made on the side panels, the Atlantis looks as if it belongs in a industrial setting!
 
From the front of the Atlantis, you can see that there is plenty of airflow for air intake at the bottom 120mm fan. The right side panel is pretty bland. At the top of the panel you will see the two spring loaded tabs for panel removal.
 
At the back of the Sigma Atlantis case, you will find at the top the mounting location for a standard ATX power supply. Below that is the included I/O shield plate, and seven expansion slots. To the right of the I/O plate, you will see a standard fan grill. This case allows for the mounting of 80mm, 92mm, or 120mm fans at the back for exhaust purposes. On the left side panel, you will find the same two release tabs as the right side panel, but you will also see the ventilation holes for two more included 120mm intake fans.
 
|
|
