|
|
|
#841 - Zalman ZM-MFC2 Fan Controller |
|
|
|
Written by Rodney Reynolds
|
|
Monday, 02 July 2007 |
|
Page 5 of 7
Installation:
Installation of this product is not very involved and
should be a snap for most because all parts of the system
are clearly labeled. It only requires mounting the main unit
in a 5.25" drive bay, installing the CVS bracket into the
expansion slot, making the power connection, CVS connection,
temperature sensor connection, sticking thermal sensors on
the hardware, and the four fan connections.
Below I've made the CVS connection into the power supply, CVS bracket and the main
unit. Not a very complicated by any means, but it's one some
of you might want to see connected for clarity. The power
cord comes from the AC outlet (wall) into the CVS, then into
the power supply and into the expansion bracket onto the
ZM-MFC2. The only downside to the CVS is it's size, but it does
sit outside the case at the back so it's not in the way.
CAUTIONARY NOTES:
1. Plugging in the CVS Cable of the CVS into the
motherboard’s USB port may damage the motherboard and CVS.
2. If the current to be measured exceeds 10A (RMS), use a
cable or conductor that allows current greater than the
current to be measured to flow through it, and always
connect protective grounding prior to use of this
instrument.
|
|
