At the front of the XCLIO 3060 Plus case, you can see right away the shinny front bezel. This creates high quality feel to the front. The front features the four external 5.25” expansion bays (one of which is pre-installed with a drive bezel), the two external 3.5” expansion bays (of which on is taken by the front I/O ports), power and reset button and status LEDs. The bottom of the front bezel is accented by a silver molding that surrounds a very large power button. Turning on this computer case is so easy “…even a cave man can do it!” To each lower side of the power button, there are air ventilation holes for the optional front fans to draw cool air into the case.
On the left of the XCLIO case is about an one and a half inch extrusion. This houses the XCLIO 360mm variable speed intake fan. This fan takes up the entire side of the case! This fan features variable speed operation through a turn knob on the side panel and also included an off/on button. There are plenty of ventilation slots and they are accented with the same silver color as the front of the case.
The back of the 3060 Plus case features the standard layout. From the top down you have the PSU mount, the I/O bay, a place for mounting two 80mm fans or a single 120mm fan, and lastly the seven standard ATX expansion slots. Also included are two silver thumb screws on the left panel.
At the right side of this case you will not find much other than some stamped air ventilation holes. Additionally, there are some ventilation holes provided at the top of the case though there is no way to mount a fan here without some drilling.
