KaNaDiAnIcEmAn
09-25-2005, 11:41 PM
im a young kid, i like pretty things, prefferably loud.
so, here yo u go!
I, just, Got my Car Stereo........
well i got 2 friends to hook them up
and here are the specs
http://akamaipix.crutchfield.com/products/2004/130/h130DEHP770-f.jpeg
Pioneer DEH-P7700MP
Details:
» CD receiver with built-in MOSFET50 amplifier (22 watts RMS/50 peak x 4 channels)
» detachable, fold-down face with Organic EL display
» 7-way Rotary Commander
» plays CDs, CD-Rs, and CD-RWs including discs loaded with MP3, WMA, and AAC files (except tracks purchased at the iTunes music store)
» Easy EQ — five preset EQ curves with 3-band tone adjustment
» EQ-EX boosts selected EQ curve
» low-pass and high-pass filters
» XM and SIRIUS Satellite Radio-ready (you can add satellite radio for under $100, plus subscription)
» compatible with Pioneer's iPod™ interface adapter
» CD changer controls
» optional auxiliary input (adapter required)
» front, rear, and subwoofer preamp outputs
» Supertuner IIID+
» 18 FM/6 AM presets
» wireless remote
» clock
» CD frequency response: 5-20,000 Hz
» CD signal-to-noise ratio: 94 dB
» FM sensitivity: 8 dBf
» warranty: 1 year
http://akamaipix.crutchfield.com/products/2004/575/h575T3002-f_dmt-1.jpeg
http://akamaipix.crutchfield.com/products/2005/575/h575T3002-i-1.jpeg
Rockford Fosgate Power T3002
Thundering Rockford Fosgate Power series amps — with their fine-tuned audio controls, extreme durability, and proprietary technologies (like TRANS-ana circuitry for ultra-clean signal transfer) — are capable of stronger, more reliable performance than most other amplifiers on the market.
The Power T3002 will drive your component speakers with two channels of 50 watts RMS; switch it to mono operation, and your subs will thrive on 300 watts RMS (at 2 ohms). Thanks to the bullet-proof design, you can even run this amp at 1 ohm in stereo — yielding 150 watts to two channels. Read more
Details:
» 2-channel car amplifier
» 50 watts RMS x 2 at 4 ohms (100 watts x 2 at 2 ohms)
» 200 watts RMS x 1 bridged output at 4 ohms, 300 watts RMS x 1 bridged output at 2 ohms (2-ohm stable in bridged mode)
» variable high- and low-pass filters (40-400 Hz at 12 dB per octave)
» ParaPunch bass boost (0-18 dB, variable 35-70 Hz) with wired remote
» Tri-way capable (Tri-Way Crossover required)
» MOSFET power supply
» CEA-2006 compliant
» preamp inputs and outputs
» fuse rating: 40A x 2
» 4-gauge power and ground leads with 80 amp fuse recommended — wiring and hardware not included with amplifier
» 13-3/8"W x 2-5/16"H x 12-3/4"D
» warranty: 2 years
Stinger Capacitor 1 farad.
http://www.stingerelectronics.com/web/prods/prod_images/sc201mnc.jpghttp://www.stingerelectronics.com/web/prods/prod_images/sc201mnc_inset.gif
SC201MNC:
Chrome Plated w/Monitor top 1 farad, 16 volt (3" x 10.125"). ESR 1.75 mOhm, tolerance ± 10%.
Stinger 4 Gauge Wiring Kit.
http://www.stingerelectronics.com/web/prods/prod_images/swk4.jpg
SWK4- Power Kit for Amplifiers up to 1400 Watts
18 feet of 4 ga. Custom PRO Red Power Wire
3 feet of 4 ga. Custom PRO Black Ground Wire
1- 24kt Gold Plated ANL Fuse Holder with 150 Amp ANL fuse
17 feet of 18 ga. Amplifier Remote Turn-on Wire
1- 24kt Gold Plated Super Surface Contact Grounding Terminal
10- 7 inch wire ties
Full Assortment of 24kt Gold Plated Terminals and Hardware
Protective, Snap-in Wire Grommet
Kicker CompVR 05CVR122
12" subwoofer
http://akamaipix.crutchfield.com/products/2005/206/h2065c12vr2-b.jpeg
http://akamaipix.crutchfield.com/products/2005/206/h2065c12vr2-f.jpeg
TWO OF THESE IN A PORTED BOX!!!
» 12" sub with dual 2-ohm voice coils
» suitable for marine use
» injection-molded polymineral cone
» double-stitched, foam-ribbed Santoprene rubber surround
» frequency response: 25-500 Hz
» power handling: 50-400 watts RMS
» peak power: 800 watts
» sensitivity: 86.5 dB
» top-mount depth: 6-5/16"
» sealed box volume: 1.0-4.6 cu. ft.
» ported box volume: 1.75-2.25 cu. ft.
Now people will know when the photographer has arrived
and what car to break into!
so, here yo u go!
I, just, Got my Car Stereo........
well i got 2 friends to hook them up
and here are the specs
http://akamaipix.crutchfield.com/products/2004/130/h130DEHP770-f.jpeg
Pioneer DEH-P7700MP
Details:
» CD receiver with built-in MOSFET50 amplifier (22 watts RMS/50 peak x 4 channels)
» detachable, fold-down face with Organic EL display
» 7-way Rotary Commander
» plays CDs, CD-Rs, and CD-RWs including discs loaded with MP3, WMA, and AAC files (except tracks purchased at the iTunes music store)
» Easy EQ — five preset EQ curves with 3-band tone adjustment
» EQ-EX boosts selected EQ curve
» low-pass and high-pass filters
» XM and SIRIUS Satellite Radio-ready (you can add satellite radio for under $100, plus subscription)
» compatible with Pioneer's iPod™ interface adapter
» CD changer controls
» optional auxiliary input (adapter required)
» front, rear, and subwoofer preamp outputs
» Supertuner IIID+
» 18 FM/6 AM presets
» wireless remote
» clock
» CD frequency response: 5-20,000 Hz
» CD signal-to-noise ratio: 94 dB
» FM sensitivity: 8 dBf
» warranty: 1 year
http://akamaipix.crutchfield.com/products/2004/575/h575T3002-f_dmt-1.jpeg
http://akamaipix.crutchfield.com/products/2005/575/h575T3002-i-1.jpeg
Rockford Fosgate Power T3002
Thundering Rockford Fosgate Power series amps — with their fine-tuned audio controls, extreme durability, and proprietary technologies (like TRANS-ana circuitry for ultra-clean signal transfer) — are capable of stronger, more reliable performance than most other amplifiers on the market.
The Power T3002 will drive your component speakers with two channels of 50 watts RMS; switch it to mono operation, and your subs will thrive on 300 watts RMS (at 2 ohms). Thanks to the bullet-proof design, you can even run this amp at 1 ohm in stereo — yielding 150 watts to two channels. Read more
Details:
» 2-channel car amplifier
» 50 watts RMS x 2 at 4 ohms (100 watts x 2 at 2 ohms)
» 200 watts RMS x 1 bridged output at 4 ohms, 300 watts RMS x 1 bridged output at 2 ohms (2-ohm stable in bridged mode)
» variable high- and low-pass filters (40-400 Hz at 12 dB per octave)
» ParaPunch bass boost (0-18 dB, variable 35-70 Hz) with wired remote
» Tri-way capable (Tri-Way Crossover required)
» MOSFET power supply
» CEA-2006 compliant
» preamp inputs and outputs
» fuse rating: 40A x 2
» 4-gauge power and ground leads with 80 amp fuse recommended — wiring and hardware not included with amplifier
» 13-3/8"W x 2-5/16"H x 12-3/4"D
» warranty: 2 years
Stinger Capacitor 1 farad.
http://www.stingerelectronics.com/web/prods/prod_images/sc201mnc.jpghttp://www.stingerelectronics.com/web/prods/prod_images/sc201mnc_inset.gif
SC201MNC:
Chrome Plated w/Monitor top 1 farad, 16 volt (3" x 10.125"). ESR 1.75 mOhm, tolerance ± 10%.
Stinger 4 Gauge Wiring Kit.
http://www.stingerelectronics.com/web/prods/prod_images/swk4.jpg
SWK4- Power Kit for Amplifiers up to 1400 Watts
18 feet of 4 ga. Custom PRO Red Power Wire
3 feet of 4 ga. Custom PRO Black Ground Wire
1- 24kt Gold Plated ANL Fuse Holder with 150 Amp ANL fuse
17 feet of 18 ga. Amplifier Remote Turn-on Wire
1- 24kt Gold Plated Super Surface Contact Grounding Terminal
10- 7 inch wire ties
Full Assortment of 24kt Gold Plated Terminals and Hardware
Protective, Snap-in Wire Grommet
Kicker CompVR 05CVR122
12" subwoofer
http://akamaipix.crutchfield.com/products/2005/206/h2065c12vr2-b.jpeg
http://akamaipix.crutchfield.com/products/2005/206/h2065c12vr2-f.jpeg
TWO OF THESE IN A PORTED BOX!!!
» 12" sub with dual 2-ohm voice coils
» suitable for marine use
» injection-molded polymineral cone
» double-stitched, foam-ribbed Santoprene rubber surround
» frequency response: 25-500 Hz
» power handling: 50-400 watts RMS
» peak power: 800 watts
» sensitivity: 86.5 dB
» top-mount depth: 6-5/16"
» sealed box volume: 1.0-4.6 cu. ft.
» ported box volume: 1.75-2.25 cu. ft.
Now people will know when the photographer has arrived
and what car to break into!